Family RVing Magazine
  • FMCA.COM
  • CONTACT US
familyRVing
  • in this issue
  • tech
    • Tech talk e-newsletter archives
    • more tech talk
  • Digital editions
  • towable guides
  • Classifieds
  • contact
    • contact us
    • advertise with us
    • media room
  • FMCA

Family RVing Magazine

Tech & Travel Tips: April 2015

April 1, 2015
 
Cost Comparison
 
If you pay for electricity at a campsite but wonder whether it would be more economical to operate your refrigerator on propane, here’s how to make an approximate cost comparison. Multiply the electric rate per kilowatt-hour by 20, and compare that cost to the price of a gallon of propane. This comparison works for the average 8-cubic-foot refrigerator and is very close for other sizes.
 
Bill Hendrix, F761S
Erie, Colorado


 
Caulking Tube Remedy
 
It’s impossible to dig out dried caulk from the small nozzle of a plugged-up caulking tube. So, here’s how to rejuvenate that nozzle. First, make one or two slits lengthwise along the nozzle, which allows you to remove the dried caulk from it and the top of the tube. Next, wrap the nozzle with several layers of flexible electrical tape. The caulking tube then can be used normally. If necessary, the tape can be extended past the tip to reduce the nozzle size. 
 
Keith Hobson, F344046
Almonte, Ontario 
 
Editor’s note: To prevent a nozzle from clogging in the first place, seal it with a cap. One such product is CRL Little Red Nozzle Caps. The cost of a package of 35 is about $11 on www.amazon.com.  


 
Building A Headboard
 
Our motorhome’s bed is against the bedroom window, which is also the emergency exit. Having our heads against the window and curtains is uncomfortable, so I installed a headboard that is both functional and matches the interior décor. It is also easy to remove in case of emergency.
 
For the headboard, I purchased a 4-foot-by-2-foot, 1/2-inch-thick piece of oak veneer, along with edge molding and trim pieces. I made cuts for the trim and molding with my miter box and handsaw. For the mounting, I installed 2-foot-by-2-foot boards alongside the window, which provided enough clearance for the headboard and emergency latches. The headboard was sanded, stained, and finish-coated with polyurethane. I used industrial hook-and-loop fastening material on the 2-by-2 strips and the back of the headboard to attach it.
 
The full day/night shade was removed and replaced with a roller shade, and curtains were redraped to fall behind the headboard. In case of emergency, simply pull the headboard away from the wall and open the window. 
 
Ross Linnemann, F428968
Piedmont, Oklahoma
 
Editor’s note: For safety reasons, we recommend that the headboard not extend so far vertically that it obstructs any of the window for emergency exit.
 
previous post
Keep It Cold
next post
Pleasure-Way Plateau XL

You may also like

RV Products: September 2015

September 1, 2015

Recall Corner: March 2105

March 1, 2015

Surprising Neighbors In Northeast Arkansas

November 1, 2015

Springtime on the Blue Ridge Parkway

March 1, 2015

RV News: April 2015

April 1, 2015

Family and Friends: Chapters Double Their Fun In...

February 1, 2015

Take A Flight To Oshkosh

June 1, 2015

Tech & Travel Tips: October 2015

October 1, 2015

Rear View: March 2015

March 1, 2015

Family & Friends: Over The Hill Chapter Marks...

February 1, 2015






  • Facebook
  • Twitter
  • Instagram
  • Pinterest
  • Youtube

©2023 - Family Rving Magazine All Rights Reserved.


Back To Top

FMCA members have access to exclusive articles and RV tips, plus a digital library of RVing know-how. For full access to website content, plus must-have travel benefits, join FMCA today and get instant access to Family RVing magazine.

If you already have a membership with us, sign in now to get full access!

Join Now Sign In